| Silent Gliss
1021 1025 Curtain Tracks |
 |
 |
|
Exceptionally discreet
tracks with Ceiling (1025) and Face Fix
(1021) options. These curtain tracks should be fitted directly
to a wooden baton.
As will most Silent Gliss
Tracks the 1021 and 1025 are available in lengths of
up to 6m without a join.
Because of the ultra discrete
profile of the Silent Gliss 1021 and 1025 curtain rails
you will often see them used in boats, caravans and
camper vans and aircraft.
This track can be
bent for bay windows and other applications where a
curtain track with bends is required. If you are interested in a quote for a bay window please complete a
Made
to Measure Form
Click
on the images below to
enlarge them. |
|
The 1021 and 1025 are available in the following finishes.
Silver -
Gold -
White - Bronze |
 |
|
Track Profiles. |
|
Silent Gliss 1021 with standard
glider. |
 |
|
Silent Gliss 1025 with standard
glider. |
 |
|
The bending Radii for both the 1021 and the 1025 track
is: Standard
bending Radius -100mm
Minimum Bending Radius for Arch - 300mm |
|
Fixing Options |
|
Both the Silent Gliss 1021 and the
1025 are predrilled for fixings, but as stated this
track will take heavier curtains provided extra fixings
are used. |
 |
|
The 1025 can be doubled up, or if
required additional extra tracks can be added. |
|
|
The 1021 needs to be set up
specifically if you want to use standard heading tape
curtain hook, however it can also be fitted flush with
the wall if required and curtains with standard heading
tape used in conjunction with a specific
Silent Gliss Curtain Hook
The illustrations to the right
should give you more fixing ideas. |
|
|
Accessories |
|
Because these Silent Gliss tracks
are fixed directly to the wall or ceiling there are few
accessories other than gliders and end stops. |
|
From left to right, the Standard
Glider, the Retrofit Gliders which can be
pushed into the track without the need to remove the
track or end stops,the Rotating Gliders, hook glider for
1021, and a flush glider which needs to be used in
conjunction with special heading tape. |
|
End stop variations are also
available, the Metal end stop with the screw in eyelet
comes as standard with the Silent Gliss 1021 and 1025
curtain tracks.
All of these end stops can be loosened and repositioned
anywhere along the track.
From left to right Spring Stop, Metal , Screw
End Stop Twist Eye, Screw Twist Eye. |
|
|
Spare parts and more detailed
pictures can be viewed and purchased by following the
link below.
Silent Gliss Spare Parts |
|
This track is suitable for
bay windows, however only angle bends are available. |
