|
The images and
descriptions below will help you to measure your Swept Bay
Window accurately and to give us all the measurements we need to
check your measurements and ensure that your Bay Window Pole or
Track fits properly.
Click
on the images to enlarge them. |
 |
All tracks or poles for a swept bay window
can only be bent to an arc of a circle. If you are ceiling
fixing then you have the advantage of flexibility in so far as
where the brackets are positioned, if you are face or wall
fixing your track then we will work out the type and lengths of
the brackets required, some of these may be adjustable.
To start the measuring process stick blue
tack or something that will give you a fixed point to measure
too evenly along the sweep. |
|
Note that we will need all the same
measurements that you would submit for a normal multi-angle bay
window. |
 |
 |
It is important to give us the AB, BC
measurements around the bay and also the diagonals in order for
us to triangulate these and build up our scale drawings of your
bay, from which we can work out the best bending radius and the
brackets required. |
|
Give us a reasonable number of
measurements. The more measurements you give us the more
accurately we can draw out your bay window. |
 |
|
In summary fill in the made to measure form
just as you would for the multi-angle bay window, giving us the
measurements as they are below. |
|
|
